Model
CH-3060-16P
Optional
36" long combination Ring Drawbar/ T-Handle
includes 2-1/2" I.D. Eye for intermittent
towing at speeds under 5 mph. Factory installed
in place of standard T-handle. Capacities
reduced by 25% when towing. Model
004-0184 |
|
*
Pan Steel Decks are standard with a 1-1/2 "
retaining lip. For Flush Steel Deck, add -FSD
to model number.
Flush Deck with Mold-On Rubber Wheels
|
|
Capacities
to 3500 lbs.
Fifth
wheel steering describes a type of steering where the
front wheels and axle assembly pivot on a center point,
which is referred to as the fifth wheel. Because the
steering wheels encounter less friction when turning
than would be encountered in a swivel caster, wagon
trucks with fifth wheel steering can be easier to maneuver
under heavier load conditions. This is especially true
when softer, wider pneumatic wheels are required because
of use on rough or uneven surfaces. Wagon Trucks with
this type of steering are typically pulled, but can
also be pushed. T- handle with vinyl handgrips allows
two man operation.
- Heavy
12 gauge reinforced steel
decks with 1-1/2" retaining lip, or
flush edge.
- Full
1 inch diameter axle and
roller bearing wheels.
- Structural
channel undercarriage
for heavier loads and durability.
WHEEL
SELECTION |
| |
12"
x 2-1/2"
Mold-On Rubber
3500 lbs Capacity
Deck Height: 16-1/2" |
16"
x 4"
4-ply Pneumatic
3000 lbs Capacity
Deck Height: 18-1/2" |
12"
x 3-1/2"
4-ply Pneumatic
2000 lbs Capacity
Deck Height: 16-1/2" |
| Deck
Size |
|
|
|
24
x 48 |
|
|
|
30
x 48 |
|
|
|
30
x 60 |
 |
CH-3060-12MR |
|
216 |
|
|
CH-3060-16P |
|
165 |
|
|
CH-3060-12P |
|
155 |
|
| 30 X 72 |
|
|
|
36
x 60 |
|
|
|
36
x 72 |
|
|
|
|
